The Smart Tek family

THE WORDS, WITHOUT THE JARGON

Plain-English glossary

Technology gets harder to discuss when every part has a short name and several names sound almost the same. This glossary explains the terms you may hear during a site visit in the way we would explain them across a kitchen table. It is not a list of things to buy; it is a way to understand what each part does before making a decision.

Network and Wi-Fi

Router
The router directs traffic between your home network and the internet. It also helps decide how devices in the house connect to one another.
Access point
An access point creates Wi-Fi coverage in part of the house. It usually connects back to the main network with a cable so it is not relying on another weak wireless signal.
Extender
An extender receives an existing Wi-Fi signal and rebroadcasts it. It can help a hard-to-reach spot, but it still depends on the quality of the signal it receives.
Mesh
Mesh is a group of access points designed to work as one Wi-Fi system. It does not remove the need for sensible placement and a good connection between the units.
Switch
A network switch connects wired devices within the house. It gives equipment such as cameras, TVs and access points a place to plug into the same network.
PoE
Power over Ethernet lets a suitable network cable carry both data and electrical power. It is commonly used for cameras and access points, so they do not each need a separate wall adapter nearby.
Bandwidth versus coverage
Bandwidth is how much data a connection can carry. Coverage is where you can get a usable wireless signal; buying more bandwidth does not by itself fix a room with poor coverage.
Structured wiring
Structured wiring is the organized set of low-voltage cables run through the house and back to a central equipment location. It can support the network, TVs, speakers, cameras and controls.
Subnet
A subnet is a section of a local network. Devices on different sections may not find one another automatically unless the network is set up to allow that communication.

Cameras and recording

NVR versus DVR
An NVR records cameras that send video over the network. A DVR typically records cameras connected with coaxial video cable; both are boxes that store footage.
Resolution
Resolution is the number of tiny picture elements that make up the image. Higher resolution can reveal more detail, but lens choice, lighting and camera placement still matter.
Field of view
Field of view is how much of the scene a camera can see. A wider view covers more area, but a person or object farther away takes up fewer pixels in that picture.
Zones
A zone is an area you choose for a particular purpose. On a camera it may be the part of the picture that triggers alerts; on an audio system it is a room or area you can control separately.

Audio and video

Matrix
A matrix sends one or more video sources to one or more TVs. Where the system allows it, each TV can choose what it wants to watch without a separate box at every screen.
Receiver versus amplifier
An amplifier provides the power that drives speakers. A receiver includes amplification and also selects sources, with features such as radio, streaming or video switching depending on the model.
ARC and eARC
ARC and eARC let a TV send sound back through an HDMI cable to a soundbar or receiver. eARC can carry higher-quality sound formats when all the connected equipment supports them.

Lighting and control

Keypad versus dimmer
A dimmer raises and lowers a light circuit. A keypad has buttons that can recall scenes or issue other commands, and some keypads also include dimming controls.
Scene
A scene is a saved group of settings. One press might set several lights and shades for dinner, watching TV or leaving the house.
Processor
The processor is the main controller that runs the automation system’s instructions. Depending on the system, it can keep local scenes and schedules working even when the internet is unavailable.

A useful way to use the glossary

You do not need to remember every term. When a proposal or a service conversation uses one, ask which room it serves, what it connects to and what happens if it loses power or internet. Those three questions usually make the role of the equipment clear.

FAQ

Frequently asked questions

No. A router manages the connection between networks. Wi-Fi is the wireless connection created by an access point, which may be built into the router or installed separately.

No. Resolution is only one part of detail. Placement, lens, light, night-time reflections and the amount of area in view all affect whether you can recognize what matters.

Not quite. Both extend wireless coverage, but mesh units are designed to work together as one system. Either approach still depends on placement and the connection between units.

No. A scene can affect one room, one floor or the whole house. It should cover only the actions that make sense together.

See the systems behind the terms

For routers, access points and switches, see Networking & Wi-Fi. For recorders and camera terms, see Surveillance Systems. For scenes, keypads and processors, see Lighting & Shade Control and Smart Home Integration.

Talk it through with us

Call 631-656-9180, Mon–Fri 8 AM–6 PM and Sat 9 AM–1 PM, or tell us what is happening through the contact form. We serve Long Island, Manhattan and the Hamptons.

LET'S BUILD SOMETHING

ONE COMPANY FOR THE
WHOLE HOUSE.

TVs, audio, Wi-Fi, cameras, lighting and shades — designed, installed and supported since 2004.

Book a free site visit, or call 631-656-9180 · Mon–Fri 8 AM–6 PM, Sat 9 AM–1 PM

Smithtown, NY 11787 · Serving Long Island, Manhattan and the Hamptons